As posted on ursulav's livejournal:
“Last night as I was sleeping,
I dreamt – marvelous error!–
that I had a beehive
here inside my heart.
And the golden bees
were making white combs
and sweet honey
from my old failures.”
— Antonio Machado
I went out last weekend, in the sunshine, to find a cloud of active, healthy bees around my hive. John and I were happy for a moment, thinking that they were actually orienting bees, and the mite treatment had worked, but it turned out that it was a healthy colony robbing out the last dregs of my poor hive...
They killed off the very last bees in my hive, and were taking all the honey that they could take, which is actually kind of good for them, as it'll help them survive this fall, and the winter. The poor last spots of brood were dead or dying from lack of care, and it was just all pretty much gone.
A failure, truly, and I think I have a little more of an idea as to what went on. The mites were taking over badly, and the cold weather after I'd taken off the last super really didn't allow for there to be much nectar around. There was honey in the brood chambers, so they shouldn't have just starved, but the cold probably made it hard for them to get around, and there was no pollen to be had. Maybe if I'd put pollen patties on? I dunno, as some people really advise against it because it seems to signal spring to some brood, but it would have been what they needed when they needed it. Plus, I'd seen pesticide die off on the front step, so some of the girls had gotten into something they really shouldn't have.
It would have been better if I'd been able to treat them with mite treatment when I actually had ordered the stuff, 2-day postage, but they were unable to fulfill the order for nearly three weeks. So I was stuck and then the weather went freezing for another three days before I could go in. Better yet was if I'd gotten the Mite Away and actually applied it in July when I saw mite drop. Next time. Next time...
Honey from my failures...
Anyway... John and I pulled all the boxes that night, except for the lowest brood box that had half a dozen tiny native bees who were living on the honey and wax that night. They left in the morning, and I got everything into the garage. We just dumped all the foundation with pollen and the spotty dead brood, in case there was pesticide in the pollen, and cleaned off all the frames, and the remaining eight drawn comb full height foundation frames I've been rotating through our deep freeze to kill of wax moths, and then store, sealed in bags, in the garage for the next time I actually get bees.
Tim Brod is a local bee breeder, and he supplies queens, not so much workers, but it might be fun to buy from him next time, instead of from California. Someone kept saying that I should find a wild hive and claim it for my own, but I'm not going to bother native bees that are comfortable in their own habitat. A swarm? Maybe. But not an established colony.
In any case, I now have the winter off as a beekeeper, and the surprising thing is that while I have mourned the girls, and burned offerings in their memory. I loved having them a lot, but it's also something of a relief not to have to worry about them anymore... when there's a cold snap, I don't have to wonder how it's affecting them, and when it gets hot, I don't have to worry about how much ventilation they're getting.
Anyway... I was very glad I had them while I had them, and grateful to them for all they did for me and taught me. And I promise that if/when I get another colony, I'll start posting here again. Thanks for reading...
Monday, October 13, 2014
Tuesday, September 30, 2014
Drat...
Went in today to put the MiteAway strips on the top bars of the bottom of the two brood boxes. I also took the feeder off and wanted to put the super back on with the emptied frames so that the the bees could take the leftover honey off of them.
And when I opened it up, I found very very few bees in the box. The top box was practically empty. The honey in the feeder was about half gone, and while there were a few bees up there, there weren't that many. It was a shock given how many bees there were earlier this month.
Nearly all the bees in the bottom box were between three frames on the southwest side of the bottom brood box. There weren't that many of them, but they all looked healthy, and while some had mites on them, there weren't any of the crippled wingless ones. There were bees going in and coming out of the hive, at a pretty good rate, which is partially why I was so surprised to find so few bees in the box.
When I removed the sticky board on the bottom, there was a lot of wax flakes, a lot of bee heads, and a couple of hive beetles (sighs). That isn't good, either. I suspect that the really strong wasp and hornet nests nearby took their toll on the girls, as the wasps pretty much bite their heads off.
I'd been seeing some sign of pesticide die off, as nearly every morning there were a handful of the girls on their backs, feebly waving their legs in the air on the entrance board. On cold mornings there were a lot more dead than on relatively warm mornings. I wonder if they'd brought back some poisoned pollen? I don't know.
The boxes were also pretty heavy, still, so there was honey in the frames the bees had. A number of the local keepers have experienced starving because August and September were far colder and rainier than the local flora is used to having, so they haven't been producing as much nectar. So they've been feeding at a pretty good clip. So they weren't dying off simply because I wasn't good about feeding them... there's just something else going on, and I'm kind of sad to see it.
I left the open mesh bottom board on because of the mites, to get rid of them, but maybe the ventilation is too much and it was too cold for them? Anyway, there seem to be a myriad of possible reasons, and no real way of sorting them all out. So I just put the strips on for the ladies that were left, and if I get their mite problem taken care of, and reduce them to a single, well-honeyed brood box, it might give them a little more of a chance. But this winter really looks like it's going to be a harsh one, so I don't give them much of a chance with such small numbers before even getting into winter.
It's kind of a shock, but it's also kind of to be expected, as the local keepers have been writing, lately on our email list, about what a horrible end to the season it's been. The losses are huge already, and the mite loads have been crazy. Plus, the feeding/lack of flow problem, and a lot of keepers are already losing a lot of colonies. One lady even found an abandoned apiary that she was asking for help to clean out... so it's kind of sad all around.
And when I opened it up, I found very very few bees in the box. The top box was practically empty. The honey in the feeder was about half gone, and while there were a few bees up there, there weren't that many. It was a shock given how many bees there were earlier this month.
Nearly all the bees in the bottom box were between three frames on the southwest side of the bottom brood box. There weren't that many of them, but they all looked healthy, and while some had mites on them, there weren't any of the crippled wingless ones. There were bees going in and coming out of the hive, at a pretty good rate, which is partially why I was so surprised to find so few bees in the box.
When I removed the sticky board on the bottom, there was a lot of wax flakes, a lot of bee heads, and a couple of hive beetles (sighs). That isn't good, either. I suspect that the really strong wasp and hornet nests nearby took their toll on the girls, as the wasps pretty much bite their heads off.
I'd been seeing some sign of pesticide die off, as nearly every morning there were a handful of the girls on their backs, feebly waving their legs in the air on the entrance board. On cold mornings there were a lot more dead than on relatively warm mornings. I wonder if they'd brought back some poisoned pollen? I don't know.
The boxes were also pretty heavy, still, so there was honey in the frames the bees had. A number of the local keepers have experienced starving because August and September were far colder and rainier than the local flora is used to having, so they haven't been producing as much nectar. So they've been feeding at a pretty good clip. So they weren't dying off simply because I wasn't good about feeding them... there's just something else going on, and I'm kind of sad to see it.
I left the open mesh bottom board on because of the mites, to get rid of them, but maybe the ventilation is too much and it was too cold for them? Anyway, there seem to be a myriad of possible reasons, and no real way of sorting them all out. So I just put the strips on for the ladies that were left, and if I get their mite problem taken care of, and reduce them to a single, well-honeyed brood box, it might give them a little more of a chance. But this winter really looks like it's going to be a harsh one, so I don't give them much of a chance with such small numbers before even getting into winter.
It's kind of a shock, but it's also kind of to be expected, as the local keepers have been writing, lately on our email list, about what a horrible end to the season it's been. The losses are huge already, and the mite loads have been crazy. Plus, the feeding/lack of flow problem, and a lot of keepers are already losing a lot of colonies. One lady even found an abandoned apiary that she was asking for help to clean out... so it's kind of sad all around.
Monday, September 22, 2014
Record Keeping
Mostly to say that today I treated the hive again with powdered sugar, as I'm still waiting on the beekeeping supply place to ship my mite control strips. *sighs*
I also put all the uncapped honey into the sugar syrup feeder I usually put on near this time of the year, and fed it back to the colony. I don't make mead, I don't really use honey quickly enough to use all the uncapped stuff I got out of the super, but I had to take the super off in order for the colony to fill its brood box. This way the girls will still get the benefit of their labor. It was actually pretty close to the density of honey, so I don't feel like it's feeding them something watered down that will bring on dysentery. And it was nearly five pounds of the stuff, so it'll just help them that much more for the winter.
Also pulling and replacing the sticky board which has a pretty large number of mites, so any treatment won't hurt.
Oh! And I got another half a gallon from the very last harvest. I wasn't expecting much, so it was nice to just see what I could get.
I also put all the uncapped honey into the sugar syrup feeder I usually put on near this time of the year, and fed it back to the colony. I don't make mead, I don't really use honey quickly enough to use all the uncapped stuff I got out of the super, but I had to take the super off in order for the colony to fill its brood box. This way the girls will still get the benefit of their labor. It was actually pretty close to the density of honey, so I don't feel like it's feeding them something watered down that will bring on dysentery. And it was nearly five pounds of the stuff, so it'll just help them that much more for the winter.
Also pulling and replacing the sticky board which has a pretty large number of mites, so any treatment won't hurt.
Oh! And I got another half a gallon from the very last harvest. I wasn't expecting much, so it was nice to just see what I could get.
Monday, September 1, 2014
Final Harvest
On Saturday I went in and took the last eight super frames, I think the theory is that if the beekeeper takes all the supers off by the end of summer, the bees will still have the time, through the fall, to put in honey supplies in all the brood chambers. Two frames weren't built at all, four were half-built and half-filled and uncapped, and then the last two were completely full and capped. So the last two are the only ones I can jar to sell, the others might not be dehydrated enough for common consumption.
The local keepers say to use it for mead, and I may well do that as my husband's a brewer.
I also saw my first mite-damaged bee that had been in larval stage with the mite larva, i.e. her wings were stunted and she couldn't fly. I did another powdered sugar treatment, and changed out the sticky board. There's a LOT of mites on the board, so I've invested in some of the Mite Away formic acid strips for when the weather finally goes under 70 for a week at a time. It's time to bring out the chemical means to deal with the mites. They're just so thick on the poor girls now it was making me a little unhappy.
Still... about 60 pounds of honey from one hive for a year is really good. I've now given my yearly gifts to the neighbors that directly deal with the girls, and I'm starting to sell the honey to the rest of the neighborhood and my church. Mostly just through personal connections, since I don't process in a commercial kitchen. I think that's one reason why I'll never go beyond just the one hive, as I really don't want to get a license and have to do all the things a business would have to do. Honey for my friends and family is plenty.
I've also been using the diluted honey for brewing ginger ale, just soda pop, no alcoholic content. I simmer the ginger with a lemon and its juice as well as honey and sugar. Then I take the resultant tisane and water it down to make a gallon and add an 1/8 tsp of plain old bakers' yeast (actually instant yeast so I don't have to be careful rehydrating it). Then I give it a little time to dissolve the yeast, shake it up, bottle it, cap the bottles and wait a day or two and then I have highly carbonated ginger ale that isn't all that sweet, as the yeast has eaten most of the sugars, but it had the flowery hint from the honey over the bite of real ginger.
We've been bottling our own root beer too, with the same yeast, and there's something about the brew that slows down the yeast, so it takes three or four days before the root beer's ready, and only a day or two for the ginger ale. But hey, cheap, all-natural soda pop is fun. *grins*
In case anyone's interested in the recipe: 2 1/2 ounces coarsely grated ginger, 2/3 cup honey, 2 cups sugar, one lemon squeezed of its juice, and about 2 quarts of water. Put all that together in a pot (including the two lemon peel halves), and bring to a boil. Turn down the heat, let simmer for about 25 minutes, and then turn off the heat, cover and let cool for at least an hour. Pour through a sieve and a funnel into a gallon jug, add water to fill to a gallon and alternate cold and hot tap water to make the resultant liquid 100 degrees Fahrenheit. Add 1/8 tsp instant yeast (not regular dried yeast or live cake yeast, if you use the regular dried yeast, give it 10 minutes in a cup of warm sugared water first before tossing it in), cap the jug, shake a few times. Then bottle it and cap it, and put it out in the garage in the summer/in a warm area for a day or two and then test to see if the carbonation suits you. Makes 10 12 oz bottles and 1 8 ounce bottle.
The local keepers say to use it for mead, and I may well do that as my husband's a brewer.
I also saw my first mite-damaged bee that had been in larval stage with the mite larva, i.e. her wings were stunted and she couldn't fly. I did another powdered sugar treatment, and changed out the sticky board. There's a LOT of mites on the board, so I've invested in some of the Mite Away formic acid strips for when the weather finally goes under 70 for a week at a time. It's time to bring out the chemical means to deal with the mites. They're just so thick on the poor girls now it was making me a little unhappy.
Still... about 60 pounds of honey from one hive for a year is really good. I've now given my yearly gifts to the neighbors that directly deal with the girls, and I'm starting to sell the honey to the rest of the neighborhood and my church. Mostly just through personal connections, since I don't process in a commercial kitchen. I think that's one reason why I'll never go beyond just the one hive, as I really don't want to get a license and have to do all the things a business would have to do. Honey for my friends and family is plenty.
We've been bottling our own root beer too, with the same yeast, and there's something about the brew that slows down the yeast, so it takes three or four days before the root beer's ready, and only a day or two for the ginger ale. But hey, cheap, all-natural soda pop is fun. *grins*
Friday, August 15, 2014
Another Two Gallons
The girls have been very productive, indeed... and I've been kind of remiss about actually recording everything.
In July, on the 25th, I actually pulled four frames, or one and a quarter gallons of honey, from the bottom of the two supers I had on the hive, and I swapped the positions of the supers, so that they'd work on the "lower" and half-full super before they worked on the upper one. John and I scraped clean the four frames, and the next morning I put them all back in to let the bees clean them off.
Then, this month, on August 12th, I pulled the other four frames from the upper super, and found out that they'd half built and filled one of the empties I'd put in in July. The super that was now on the bottom was about three-quarters full. So I pulled three full frames out of that, and left the five half-filled ones, putting the half-built frame from the upper into the lower, and added the two frames that were still empty from the upper super.
Then I took the upper super completely off the hive, to help the colony compact a little before fall. I'm going to have to have all the supers off before winter and before I do my mite treatment, so it's better to get them used to a little smaller space. But I also wanted to shuffle through the frames as we emptied them to allow the bees to clean all the honey off of them.
It took us two days to get the first three frames cleaned off, and by then, the girls had actually built comb up on one of the 'empty' frames. They'd also completely filled the top super with bees, who were busily building and filling! Agh. I pulled that frame out, put it by the entrance to let the bees empty it of the uncapped honey, and I managed to shuffle in the three empty frames, and then after taking a night off to Estes Park, we came back and I shuffled in two more of the empty frames. Tonight we're finally emptying the last two, and I hope to get those in tomorrow, along with the wax built one, hopefully for the other one that was in there from yesterday, but it's been a little crazy going in every day. They don't seem to mind that much so long as I don't leave the hive open too long.
And it looks like two more gallons of honey.
I also saw some hornets and wasps stealing honey and trying to rob the hive, but the girls were having none of that. I've left a lot of things open for ventilation for the summer, but with the nights getting longer and cooler, I'm probably going to remove the summer shims from the inner cover and put in my usual winter popsicle sticks that just allow ventilation and no actual insects through. The girls have taken to lining the inside of the outer cover and completely covering the bottom of the inside cover with bees just to defend those slots. So I'm going to close those up tomorrow. I think that, also, the two brood boxes aren't quite meeting, but I also have a single knothole in the back of the hive that the girls have been using as a second entrance for the last two years.
I had a lot of fun just squashing wasps and hornets when they touched down on the honey in my empties tray and as soon as I could ID 'em, I'd squash 'em.
Anyway... that's more than four gallons of honey this year, or something like 50 pounds already. That's a LOT of honey. I got 40 all together last year. So the "common knowledge" that a colony usually does better its second year is already true for this one.
In July, on the 25th, I actually pulled four frames, or one and a quarter gallons of honey, from the bottom of the two supers I had on the hive, and I swapped the positions of the supers, so that they'd work on the "lower" and half-full super before they worked on the upper one. John and I scraped clean the four frames, and the next morning I put them all back in to let the bees clean them off.
Then I took the upper super completely off the hive, to help the colony compact a little before fall. I'm going to have to have all the supers off before winter and before I do my mite treatment, so it's better to get them used to a little smaller space. But I also wanted to shuffle through the frames as we emptied them to allow the bees to clean all the honey off of them.
It took us two days to get the first three frames cleaned off, and by then, the girls had actually built comb up on one of the 'empty' frames. They'd also completely filled the top super with bees, who were busily building and filling! Agh. I pulled that frame out, put it by the entrance to let the bees empty it of the uncapped honey, and I managed to shuffle in the three empty frames, and then after taking a night off to Estes Park, we came back and I shuffled in two more of the empty frames. Tonight we're finally emptying the last two, and I hope to get those in tomorrow, along with the wax built one, hopefully for the other one that was in there from yesterday, but it's been a little crazy going in every day. They don't seem to mind that much so long as I don't leave the hive open too long.
And it looks like two more gallons of honey.
I also saw some hornets and wasps stealing honey and trying to rob the hive, but the girls were having none of that. I've left a lot of things open for ventilation for the summer, but with the nights getting longer and cooler, I'm probably going to remove the summer shims from the inner cover and put in my usual winter popsicle sticks that just allow ventilation and no actual insects through. The girls have taken to lining the inside of the outer cover and completely covering the bottom of the inside cover with bees just to defend those slots. So I'm going to close those up tomorrow. I think that, also, the two brood boxes aren't quite meeting, but I also have a single knothole in the back of the hive that the girls have been using as a second entrance for the last two years.I had a lot of fun just squashing wasps and hornets when they touched down on the honey in my empties tray and as soon as I could ID 'em, I'd squash 'em.
Anyway... that's more than four gallons of honey this year, or something like 50 pounds already. That's a LOT of honey. I got 40 all together last year. So the "common knowledge" that a colony usually does better its second year is already true for this one.
Wednesday, June 18, 2014
A Surprise Harvest
Still, the girls were going strong, and I wanted to see where they were. Also, the top of my two deep brood boxes was filled with old frames that had wood that was starting to come apart. So I wanted to swap out some of the old frames for new ones and move the frames with brood still in them more to the edge so that I could, eventually, take them out, too. A long, slow process, but I figured I'd start by pulling one of the honey-filled frames in that box and substitute in a new frame.
I also wanted to see how they were doing with the new super, how far they'd gotten. The last time I'd looked, they'd only started building comb in the box. I had had a queen excluder between the brood box and the supers, but I pulled it out in impatience during the last inspection, as last year the queen hadn't left the established brood chamber at all, so I hoped that she wouldn't this year either.
I was well rewarded with my hope.
I was pretty amazed. Last year, when the bees first came and were establishing themselves, they had managed to fill three-quarters of one brood box by this time, and there wasn't even the thought of supers or honey that I could harvest at the this point, but it was pretty clear that they were doing really well right now. One of the keepers on the local email lists had said that the local yellow clover was going crazy with the unusually damp spring, so that we should all expect a lot of nectar flow. I still hadn't quite expected *this*.
I'll probably do the shift the next time I go into the brood box, but it's good to just get the frame in. A local keeper had just done a study where he found that the keepers that just left all the old brood comb and frames in the box were less likely to have a die off than those that regularly circulated out old frames. It was a correlation, not causation, so he doesn't know why the die offs were less with old comb. Just that those with those tendencies had those results. So I'm unlikely to switch out a lot. And thinking it through some more I probably should have just worked to swap out the broken frame. Next time...
Still... this time I stole a bit more honey, and hopefully made a bit more room for the bees to fill in the brood box. They don't seem in any more of a situation where they will swarm, so this should just help that.
It's also kind of fun to see all the powdered "ghost" bees zooming around, though it does kind of perturb the poor girls. I do see a much higher mite count on the bottom board when I do this than when I don't, which probably just means that they're pulling more mites off each other and themselves when I do this. I'm supposed to do it on a weekly basis to really do a good job of it, but I just don't manage to get into the hive that often. Things are so busy during the summer. But I am happy that I remembered to do it while I did have the brood box open. There have been times when I've had the sugar all ready for it and I just totally forget in the midst of the adrenaline rush of having the hive open.
I will admit that with practice the adrenaline rush is getting easier to handle. I'm now able to observe while I have the hive open, when at the beginning, it was just so overwhelming. Now I know better what to do, what to expect, how to do it, and how to keep the girls from getting crushed or not worrying too much when two or three of them do get damaged. So I'm not quite as exhausted by the time I'm done doing the work that I outlined for myself. I'm still impressed by the super experienced keeps who can go through eight hives at a shot when they're in a beeyard. Practice really does make perfect.
When he was done scraping the two frames, I put my equipment on and popped the two frames, still coated in honey, back into the top super. It should make it more attractive to the bees, and they may get going on building those up quickly with the incentive. The old empty frame I put next to the hive, and that night some creature dragged it away from the hive to try and eat it. But the plastic foundation foiled it and I let the girls clean it off the next day. Also the next day John put the pan of mashed wax out by the hive, so that the bees could eat some of the honey, but it was so hot out there that the whole pan just melted. One bee got caught, but that was it, and it cooled with the evening, so when I found it, the wax had solidified into a cake on top of a pool of pure honey. We poured that honey into another jar, and it's great. There are two jars from John's mashing that are pretty cloudy and I'm afraid he got more wax into them than I usually like having. We'll see how it settles, as the wax should come to the top. Eventually. *laughs*
For a beginning of the summer harvest, we got three quarts and another two-thirds of a pint, so about ten pounds of honey. Given than I'd gotten 40 pounds from this colony last year, I wouldn't be surprised if I got a lot more honey this year than last. But they also started a lot faster and were at great numbers even in March, so I'm just watching them very closely to make sure they have no reason to swarm.
Tuesday, May 27, 2014
Inspecting for a Queen
During the inspection I'd done on the 19th, I had half a dozen BIG larvae out of their comb in the middle of the area between the two deep brood boxes. I was worried that I'd just killed a bunch of queen larvae, but they were all together. It turns out that if the hive is making queens, they usually spread them around the box, half a dozen of them. And the only way I could tell if they were really doing that was by doing in and looking through the whole top box, which is where most of the new eggs and larvae now are.
I had one objective on the 19th, which was to get the screened bottom board in and give the hive the ventilation it needed. On the 20th, I wanted to do a complete inspection of the top box, and get some powdered sugar into the hive for the mites. Plus, on the 19th, one of the frames in the top box had the bottom bar break free of the frame, so I needed to wire it together so that it wouldn't fall apart.
When I finally got around to getting the frame out, balance on the edge of the box, and a wire around it, I found that I couldn't manipulate the wire except by taking a glove off. It was just too thin a wire, and there were too many manipulations I had to do very carefully for me to be able to do it any way but barehanded.
I was shaking pretty badly with that, but none of the girls bothered my hand at all. There were four of them bumping constantly at my veil and buzzing me continuously, but none of them bothered my hand at all. I was pretty impressed. I did get the wire around the frame and twisted together to hold. I was amazed at how hard that actually turned out to be, but I think it'll be all right. The bees can't get rid of the wire the way they can bite and chew and remove rubber bands (it still amazes me how quick they are to do that).
But the old deep frame are definitely coming apart.
The entire hive was just dripping with bees. So many bees that I couldn't even see everything that the comb was holding, but this particular blanket of bees was pretty smooth. Queen cells are bumps that are on the edges, usually, and by themselves, whereas the regular worker brood is more like this, just covered with nurse bees and the foragers who are bringing in pollen and nectar to feed all the babies.
I was amazed. The upper box had been much lighter than the lower box, but then again the lower box was more full of honey. If the upper was nearly entirely full of brood, it would be lighter than the liquid content of the honey boxes and frames.
There were some lumps and bumps, and sections that the girls had built when and where the neighboring frame was bare.
It allowed them to build the drone comb, where the cells are MUCH bigger than the worker comb, and they fill them with the male drones. The drones are very large, and they grow in packs like the big lump there in the middle. One of the strange things was realizing that there were no queen cells but a whole lot of drone clumps in all the edges and nooks and crannies that I hadn't really been able to see that much of. One of the really big chunks was right where those other poor larvae had fallen out when I'd pulled apart the boxes.
So there were drones, but all good, healthy hives are going to throw off a lot of drones this time of year. It's a way of sharing the hive's genetics, and it's a natural part of the bounty of the nectar flow. The good news was that I didn't see any queen cells at all. And I was able to drop a lot more powdered sugar on everyone. *laughs*
One of the strangest "growths" was this one, which was at the bottom corner of one of the frames. The facing frame was completely bare. This was made even more strange with the powdered sugar which I put on before I took the picture, by accident. But the fall of sugar makes it even odder yet.
Still, it really look like drone comb to me, just big cells all together instead of single Queen cells. So it looks like the hive isn't going to be swarming soon, and I'm trying to stay ahead of it by adding supers and making the hive bigger all the time.
I had one objective on the 19th, which was to get the screened bottom board in and give the hive the ventilation it needed. On the 20th, I wanted to do a complete inspection of the top box, and get some powdered sugar into the hive for the mites. Plus, on the 19th, one of the frames in the top box had the bottom bar break free of the frame, so I needed to wire it together so that it wouldn't fall apart.
I was shaking pretty badly with that, but none of the girls bothered my hand at all. There were four of them bumping constantly at my veil and buzzing me continuously, but none of them bothered my hand at all. I was pretty impressed. I did get the wire around the frame and twisted together to hold. I was amazed at how hard that actually turned out to be, but I think it'll be all right. The bees can't get rid of the wire the way they can bite and chew and remove rubber bands (it still amazes me how quick they are to do that).
But the old deep frame are definitely coming apart.
I was amazed. The upper box had been much lighter than the lower box, but then again the lower box was more full of honey. If the upper was nearly entirely full of brood, it would be lighter than the liquid content of the honey boxes and frames.
It allowed them to build the drone comb, where the cells are MUCH bigger than the worker comb, and they fill them with the male drones. The drones are very large, and they grow in packs like the big lump there in the middle. One of the strange things was realizing that there were no queen cells but a whole lot of drone clumps in all the edges and nooks and crannies that I hadn't really been able to see that much of. One of the really big chunks was right where those other poor larvae had fallen out when I'd pulled apart the boxes.
So there were drones, but all good, healthy hives are going to throw off a lot of drones this time of year. It's a way of sharing the hive's genetics, and it's a natural part of the bounty of the nectar flow. The good news was that I didn't see any queen cells at all. And I was able to drop a lot more powdered sugar on everyone. *laughs*
Still, it really look like drone comb to me, just big cells all together instead of single Queen cells. So it looks like the hive isn't going to be swarming soon, and I'm trying to stay ahead of it by adding supers and making the hive bigger all the time.
Monday, May 19, 2014
Just a bit of summer ventilation
I went in today to add the screened bottom board with sticky paper to see what the mite count is like. I wanted to get some powdered sugar in there as I could see that the girls were cleaning themselves off on the entrance board, and I also wanted to see how they were doing with the super. AND I didn't have my husband's usual help as he was busy all day.
So I got everything ready, suited up, got my weather cover off by hand, lit the smoker, and went in. It was relatively simple to just get the boxes off, moved onto surfaces that could catch a queen if she happened to drop, and I found drones everywhere. Tis the seasons for the boys to get out, I suppose, but they were so big and I haven't been good at spotting the queen and I was just wondering if any of them were her, especially once I got down to the bottom board, had all the workers who were trying to come in backed up and buzzing me, and one of the drones took off from the bottom board and dropped into one of my basement window wells. Agh.
Anyway... I also had problems remembering how everything went with the bottom board and the screened board. One of those utterly newbie mistakes where I just forgot how the damned thing went together, and spent five minutes trying to keep bees off all the pieces and puzzle-solve it while all the bees were gathering in a bigger and bigger cloud.
Of course I also found three huge larva, naked, between the bottom brood box and the top brood box. At first, I panicked, thinking that they were exposed queen larvae... and that the hive is thinking about swarming! Eeek... but they were all in a bunch and there wasn't protective walls around them. I suspect that they were actually just more drones.
They were also going through the queen excluder to the supers and building comb in the super I'd placed a month ago. The top brood chamber isn't completely full, either, and I started to do a frame by frame inspection of the top box, but one of the old frames fell apart on me, the bottom bar just pulled free, with the nail right through it. I'm probably going to have to wire that one back together again eventually.
I think I was a little unnerved by just how MANY bees there are this spring compared even to last summer. There are just so many more of them!
I finally just decided to put everything back together, with the extra ventilation shims at the top of the hive, and the extra height bars for the front entrance, so that they have a bigger landing pad. It's hard to balance those things with gloved hands, but it was pretty clear that they were trying pretty hard to sting me when I found one of the girls hanging by her stinger in my deerskin glove. She didn't get through, though, so I'm going to have to go get my bee venom shot in a week or two. *laughs*
My goals were to just give the whole hive more ventilation and put the screened board in, and do a powdered sugar sprinkle. I got the powdered sugar into the brood boxes and we'll see how that goes in a few days. They clean the sugar off themselves and in the process clean off the Varroa mites. I haven't seen evidence of any other problems, yet, and I'm hoping that that'll be enough for this summer at least.
I did what I intended, but the possibility of the colony actually swarming really threw me. I wasn't expecting that, and I know that a second year queen is always stronger than the first year she starts to lay. I had added the super to make sure they had room, and they haven't actually filled all of the top brood box yet, either, so... there may actually be plenty of space. It's all such a puzzle, and I need to keep ahead of them to accommodate their needs. I'd rather not split them unless I have to... which probably means I need to really go in and do another frame-by-frame check to see if there are queen cells anywhere.
Probably in the next day or two. Sadly, since John wasn't here, I wasn't able to get any pictures of anything, and it would have been really useful to have pictures of the broken open larvae for ID purposes from experienced keepers.
So I got everything ready, suited up, got my weather cover off by hand, lit the smoker, and went in. It was relatively simple to just get the boxes off, moved onto surfaces that could catch a queen if she happened to drop, and I found drones everywhere. Tis the seasons for the boys to get out, I suppose, but they were so big and I haven't been good at spotting the queen and I was just wondering if any of them were her, especially once I got down to the bottom board, had all the workers who were trying to come in backed up and buzzing me, and one of the drones took off from the bottom board and dropped into one of my basement window wells. Agh.
Anyway... I also had problems remembering how everything went with the bottom board and the screened board. One of those utterly newbie mistakes where I just forgot how the damned thing went together, and spent five minutes trying to keep bees off all the pieces and puzzle-solve it while all the bees were gathering in a bigger and bigger cloud.
Of course I also found three huge larva, naked, between the bottom brood box and the top brood box. At first, I panicked, thinking that they were exposed queen larvae... and that the hive is thinking about swarming! Eeek... but they were all in a bunch and there wasn't protective walls around them. I suspect that they were actually just more drones.
They were also going through the queen excluder to the supers and building comb in the super I'd placed a month ago. The top brood chamber isn't completely full, either, and I started to do a frame by frame inspection of the top box, but one of the old frames fell apart on me, the bottom bar just pulled free, with the nail right through it. I'm probably going to have to wire that one back together again eventually.
I think I was a little unnerved by just how MANY bees there are this spring compared even to last summer. There are just so many more of them!
I finally just decided to put everything back together, with the extra ventilation shims at the top of the hive, and the extra height bars for the front entrance, so that they have a bigger landing pad. It's hard to balance those things with gloved hands, but it was pretty clear that they were trying pretty hard to sting me when I found one of the girls hanging by her stinger in my deerskin glove. She didn't get through, though, so I'm going to have to go get my bee venom shot in a week or two. *laughs*
My goals were to just give the whole hive more ventilation and put the screened board in, and do a powdered sugar sprinkle. I got the powdered sugar into the brood boxes and we'll see how that goes in a few days. They clean the sugar off themselves and in the process clean off the Varroa mites. I haven't seen evidence of any other problems, yet, and I'm hoping that that'll be enough for this summer at least.
I did what I intended, but the possibility of the colony actually swarming really threw me. I wasn't expecting that, and I know that a second year queen is always stronger than the first year she starts to lay. I had added the super to make sure they had room, and they haven't actually filled all of the top brood box yet, either, so... there may actually be plenty of space. It's all such a puzzle, and I need to keep ahead of them to accommodate their needs. I'd rather not split them unless I have to... which probably means I need to really go in and do another frame-by-frame check to see if there are queen cells anywhere.
Probably in the next day or two. Sadly, since John wasn't here, I wasn't able to get any pictures of anything, and it would have been really useful to have pictures of the broken open larvae for ID purposes from experienced keepers.
Sunday, April 20, 2014
First Full Inspection of the Spring
Had a really truly full day today, and I absolutely decided that I had to fit an inspection in today.
It started with breakfast with my son, then grocery shopping for an Easter party tomorrow that will have about six families who all decided to accept the invitation today. Then I had to get a bee block for a research project for individual wasps and bees by the University of Colorado, luckily the professor lives here in Longmont, so I didn't have to go into Boulder to get it. Then my husband, son, and I helped move furniture for the owner of one of the flooded houses. The house is mostly together, and a neighbor had been storing her furniture and needed to get rid of it. So we were there to put it all into place. Luckily, one other member of the church came to help us as there was some significantly heavy lifting. Then I had an hour and a half saber lesson with the Denver Fencing Club, and my son and I both go to that, and I was exhausted by the end of it.
So, knowing I was tired, I sat down with my bee journal and a pen and wrote down exactly what it was I wanted to do with the inspection and what my decision points were. I needed to do the following:
First good surprise was finding that the lower box was nearly completely full of bees. Last spring, I installed the package, and they mostly stayed in a tight ball in the center of the box together, and built out from there. Most of the wax, of course, is still from last year, but I hadn't expected nearly all of it to be full of either brood or honey!
I did the usual thing, for me at least, of taking the top box and putting it on the lid and then going into all of the bottom box, as that was the one that I was most concerned about with regards to the misshapen comb and the amount of honey that was left.
It was really full, though, so I had to be really careful about making sure that I could get one frame out and then start sliding the other frames over so that I could remove them without crushing anyone. Luckily, nearly every frame in this particular box was new, factory assembled, and solid enough that even when they were full of honey, they lifted out quite easily and the top staple held just fine.
You can see the sheer density of bees. They were up and down most of the frames. I was using smoke so I tried to keep them away from the edges so that I could get good hand holds on the frames and not drop them.
I was surprised to see not quite as many bridging comb as I thought there was going to be. I remembered the last time I went into this box that they had comb going from frame to frame in all kinds of crazy places. I think it was one way to get drone comb in when I hadn't put any drone foundation into it. But the three pieces of bridging comb I did see was all honey comb!!
I took a few of those pieces by smoking the bees off the protrusions, and then scraping them off with my hive tool. I learned from last year, when I scraped a piece off with the bees still on it. All the bees that were on it drowned in the honey. So I decided not to do that ever again.
Another cool surprise was seeing the sheer amount of brood comb now in this box. The last time I'd done a complete inspection of this particular box, the center frames had been half filled with brood and half filled with honey. They hadn't built all the way to the top.
As you can see in this picture, the brood is pretty solid where the bees haven't hatched out, yet, and when I looked into the cells with larva in them, they were all tightly packed together. So the queen is still doing her thing and doing it really well. There were at least two solid frames of brood already, and I was pretty amazed.
The top box had the last, dried remains of the bee patties. I cleaned them all off and tossed them into our compost. The bees were pretty solid through this box as well, though it was a much lighter box than the bottom one. I think they'd eaten out all the honey and brood's pretty light.
Still, there were a lot of girls up here, too, and the brood pattern was now just the lower half of the frames up here, but they were filling the rest with honey and bee bread. I was pretty impressed by all of that, and it seems that the girls feel like they have plenty of room, as I didn't see any queen cells.
That was one of my prime worries. I didn't want to lose a very strong colony to swarming when I'd done so much work to help them make it through an extremely cold winter.
One lady who sells honey at the Longmont Farmer's Market said that they lost 70% of their hives. So it's been a pretty rough year for the commercial keepers. She said that I was good and lucky to have been able to keep my hive alive. So I'll take that as having done something right with the way I do things.
Given the sheer numbers, I thought I'd put a medium super on with a queen excluder between the brood boxes and the super. It wouldn't hurt to give them more space to grow into, and just discourage the idea of swarming all the more.
I got tired of the gloves, too, as the ladies were very gentle with me, and so when I had to respace the top bars of the super to make sure they were set at the right space, I just took my gloves off and went at it.
It's interesting that in the spring, the girls seem to be more gentle, when I know that last fall, when I was taking honey, they were really upset with me and were actively attacking me and following me around the yard after I'd stolen so much. But today, even when I was scraping off the misshapen bits, they didn't seem to care at all. They were just too busy getting things going again to bother with me.
So it was a nice, successful inspection. I didn't see any signs of diseases. The brood looked all healthy, solid, and in good shape. There were a LOT of bees, and there seemed to be plenty of honey in the hive for them to eat, since they seemed to be able to make even more as there was new, uncapped honey in a good bit of the comb.
I am very grateful that they wintered well, and that they're doing so well.
It started with breakfast with my son, then grocery shopping for an Easter party tomorrow that will have about six families who all decided to accept the invitation today. Then I had to get a bee block for a research project for individual wasps and bees by the University of Colorado, luckily the professor lives here in Longmont, so I didn't have to go into Boulder to get it. Then my husband, son, and I helped move furniture for the owner of one of the flooded houses. The house is mostly together, and a neighbor had been storing her furniture and needed to get rid of it. So we were there to put it all into place. Luckily, one other member of the church came to help us as there was some significantly heavy lifting. Then I had an hour and a half saber lesson with the Denver Fencing Club, and my son and I both go to that, and I was exhausted by the end of it.
So, knowing I was tired, I sat down with my bee journal and a pen and wrote down exactly what it was I wanted to do with the inspection and what my decision points were. I needed to do the following:
- Figure out if there were queen cells and/or drone cells to see if my very busy hive was preparing to swarm.
- See what the honey situation in the hive was to figure out if I needed to supplement with sugar syrup.
- To see what the population in the hive really was after wintering-over. And see if it was big enough to warrant a super already.
- To remove the entrance restriction. Our neighborhood's fruit trees are blossoming now, all the dandelions are out, and so our flow is On and there was going to rain tonight and tomorrow. Plus, there was going to be a week of 60+ degree day weather and no freezes at night. So it seemed time to at least do that. But I know that here we can still have a snow or two before Mother's Day, so I didn't want to put the screened bottom board in, yet.
- To remove a few frames of really badly formed comb so that I could do inspections without rolling so many bees. I knew, from last summer that two frames on the bottom box were badly deformed, and I'd deliberately moved that box to the bottom so that they'd eat it out first.
- To see how the brood was doing and what the queen's laying pattern looked like just to assess how she was doing this spring. There have been at least half a dozen orienting flights since early March that I've seen, so I knew she was laying pretty well, but I still wanted to see how it was going.
I don't do a lot of inspections. I do them only when I have a reason to, unlike some beeks who say that they go in every week, no matter what, just to keep the bees used to them. But I also don't let them just do their own thing, I'm their beekeeper, and they do rely on me to manage things, especially things like space, mite control, and the size of their entrance. And I really, truly needed to know if they were going to need to be split. I wasn't prepared to do the split today, but I needed to know if I had to prepare for it.
And knowing I was tired meant that I had to plan all my moves and contingencies. Especially since I was kind of nervous about it as I haven't done a frame-by-frame inspection of the brood box since last fall. And if I had most of my decisions points plotted out beforehand, I could just do things and follow the decision points.
I did the usual thing, for me at least, of taking the top box and putting it on the lid and then going into all of the bottom box, as that was the one that I was most concerned about with regards to the misshapen comb and the amount of honey that was left.
It was really full, though, so I had to be really careful about making sure that I could get one frame out and then start sliding the other frames over so that I could remove them without crushing anyone. Luckily, nearly every frame in this particular box was new, factory assembled, and solid enough that even when they were full of honey, they lifted out quite easily and the top staple held just fine.
You can see the sheer density of bees. They were up and down most of the frames. I was using smoke so I tried to keep them away from the edges so that I could get good hand holds on the frames and not drop them.
I was surprised to see not quite as many bridging comb as I thought there was going to be. I remembered the last time I went into this box that they had comb going from frame to frame in all kinds of crazy places. I think it was one way to get drone comb in when I hadn't put any drone foundation into it. But the three pieces of bridging comb I did see was all honey comb!!
I took a few of those pieces by smoking the bees off the protrusions, and then scraping them off with my hive tool. I learned from last year, when I scraped a piece off with the bees still on it. All the bees that were on it drowned in the honey. So I decided not to do that ever again.
As you can see in this picture, the brood is pretty solid where the bees haven't hatched out, yet, and when I looked into the cells with larva in them, they were all tightly packed together. So the queen is still doing her thing and doing it really well. There were at least two solid frames of brood already, and I was pretty amazed.
The top box had the last, dried remains of the bee patties. I cleaned them all off and tossed them into our compost. The bees were pretty solid through this box as well, though it was a much lighter box than the bottom one. I think they'd eaten out all the honey and brood's pretty light.
Still, there were a lot of girls up here, too, and the brood pattern was now just the lower half of the frames up here, but they were filling the rest with honey and bee bread. I was pretty impressed by all of that, and it seems that the girls feel like they have plenty of room, as I didn't see any queen cells.
That was one of my prime worries. I didn't want to lose a very strong colony to swarming when I'd done so much work to help them make it through an extremely cold winter.
One lady who sells honey at the Longmont Farmer's Market said that they lost 70% of their hives. So it's been a pretty rough year for the commercial keepers. She said that I was good and lucky to have been able to keep my hive alive. So I'll take that as having done something right with the way I do things.
I got tired of the gloves, too, as the ladies were very gentle with me, and so when I had to respace the top bars of the super to make sure they were set at the right space, I just took my gloves off and went at it.
It's interesting that in the spring, the girls seem to be more gentle, when I know that last fall, when I was taking honey, they were really upset with me and were actively attacking me and following me around the yard after I'd stolen so much. But today, even when I was scraping off the misshapen bits, they didn't seem to care at all. They were just too busy getting things going again to bother with me.
So it was a nice, successful inspection. I didn't see any signs of diseases. The brood looked all healthy, solid, and in good shape. There were a LOT of bees, and there seemed to be plenty of honey in the hive for them to eat, since they seemed to be able to make even more as there was new, uncapped honey in a good bit of the comb.
I am very grateful that they wintered well, and that they're doing so well.
Thursday, March 27, 2014
Spring has Sprung
And the bees are going in and out with a bunch of pollen. They seem to be doing quite well, and eventhough they promised snow today, there wasn't any, and the girls were happily working away.
There were a lot of orienting flights every single warm day after two or three cold ones, so they're really building up quickly.
I really need to go in sometime and look at the frames that are there and replace the really misformed ones with clean bases again. There were a few frames where they'd hung two sheets of wax, and I was advised that they'd eat all the honey out of them over the winter, so that I could clean them out in the spring. I'm tempted to do it soon so that they'll also have more space in the hive and feel like they have to stay and keep building instead of swarming.
It was pretty funny today, though, as I just sat outside the entrance watching them come in with their pollen pellets. I saw some black flies at the front entrance. They were just there, and the bees were ignoring them, and finally they annoyed me enough that I started swatting them. The bee-girls didn't seem to take any more notice of me swatting the flies right on the entrance board than they had been taking notice of me without the violence I was doing to the flies. It's nice to know that my girls are quite tame.
There were a lot of orienting flights every single warm day after two or three cold ones, so they're really building up quickly.
I really need to go in sometime and look at the frames that are there and replace the really misformed ones with clean bases again. There were a few frames where they'd hung two sheets of wax, and I was advised that they'd eat all the honey out of them over the winter, so that I could clean them out in the spring. I'm tempted to do it soon so that they'll also have more space in the hive and feel like they have to stay and keep building instead of swarming.
It was pretty funny today, though, as I just sat outside the entrance watching them come in with their pollen pellets. I saw some black flies at the front entrance. They were just there, and the bees were ignoring them, and finally they annoyed me enough that I started swatting them. The bee-girls didn't seem to take any more notice of me swatting the flies right on the entrance board than they had been taking notice of me without the violence I was doing to the flies. It's nice to know that my girls are quite tame.
Monday, March 10, 2014
Last Winter Feed
It was 70° today and yesterday. The girls have been tumbling over each other getting in and out of the most restrictive entry. They even shoved the bar over so that they could get in and out one side of it, and they're all carrying pollen. There's silver maple here than blooms early, and I saw the aspens blooming as well, but they're not bee-friendly.
So I went in, today, opened up the hive, put more of the feeding patties on, as I have plenty of them and the girls were gobbling them up, using them as brood food. There's enough sugar and corn syrup in them for me to know that they're not going to starve. There are a lot of bees in the box, and I'm going to have to watch to make sure that they don't swarm. I didn't take apart all the frames today, simply because it was cloudy and there was a wind blowing, and my snow cover is a pain to take off from over the hive and it's supposed to snow tomorrow.
I know. Colorado weather.
Anyway... I also decided to take out the entrance restriction and let the girls clean out the bottom of the hive, as they have a huge pile of shaved wax built up behind it. And in the process of trying to get that out, I hefted the two brood boxes, and they're heavy. That means that they still have a ton of honey left for themselves! So I'm unlikely to feed them sugar syrup this spring. Just let them take care of themselves.
They were very happy, and there are a lot of bees not just in there, but working hard to build up the colony to be ready for spring. I'm going to have to go in, some 60/70 degree day and really assess if there are drone cells and/or queen cells to really know if they're going to swarm, but I wasn't quite up to it today.
One really good thing, though, was that I had a bee venom shot last Monday, and it's two sting's worth of venom, and the area that got shot was only a little warm. No swelling, no massive itching, no long-term pain at all, especially compared to the ankle sting I'd had last summer. So the shots really are working well. I don't exactly want to test it with a live sting, but now I'm far more confident when I work the girls and there's so much less to be afraid of that it's amazing.
So I went in, today, opened up the hive, put more of the feeding patties on, as I have plenty of them and the girls were gobbling them up, using them as brood food. There's enough sugar and corn syrup in them for me to know that they're not going to starve. There are a lot of bees in the box, and I'm going to have to watch to make sure that they don't swarm. I didn't take apart all the frames today, simply because it was cloudy and there was a wind blowing, and my snow cover is a pain to take off from over the hive and it's supposed to snow tomorrow.
I know. Colorado weather.
Anyway... I also decided to take out the entrance restriction and let the girls clean out the bottom of the hive, as they have a huge pile of shaved wax built up behind it. And in the process of trying to get that out, I hefted the two brood boxes, and they're heavy. That means that they still have a ton of honey left for themselves! So I'm unlikely to feed them sugar syrup this spring. Just let them take care of themselves.
They were very happy, and there are a lot of bees not just in there, but working hard to build up the colony to be ready for spring. I'm going to have to go in, some 60/70 degree day and really assess if there are drone cells and/or queen cells to really know if they're going to swarm, but I wasn't quite up to it today.
One really good thing, though, was that I had a bee venom shot last Monday, and it's two sting's worth of venom, and the area that got shot was only a little warm. No swelling, no massive itching, no long-term pain at all, especially compared to the ankle sting I'd had last summer. So the shots really are working well. I don't exactly want to test it with a live sting, but now I'm far more confident when I work the girls and there's so much less to be afraid of that it's amazing.
Friday, January 17, 2014
A Warm Break
It was warm today, nearly 60, and the side yard was sunny and bright. When I went out at 2pm I heard the hum that Jet calls 'the vacuum sound'. It's the usual sound of new bees orienting themselves!
After the other article about the fact that the bees are still rearing young in the winter, it wasn't as unexpected as it would have been before. But I was still pleasantly surprised to see the cloud of bees hovering in front of the hive. It made me put on my suit and veil and have John light up my smoker, because I was going to approach a living, active hive instead of the one that was very quiet and didn't have that many bees in December.
This is the box of patties that I was mailed. It's probably more than a single hive can use in a winter, given how slowly they're actually eating it. It's about 10 pounds of pollen substitute, sugar, and corn syrup cooked into slabs that can fit under the lid of the hive. The mix of proteins smells like brewer's yeast when I open up the bag, and it's supposed to be refrigerated, so I keep it in our 30 degree garage on the most part. When the weather warms and I start putting supers onto the boxes I can't have this stuff on the bars because the bees will try to pack some of it away.
So it'll probably go into the freezer at that point, and there's plenty for at least another year, even if I split the hive into two hives and have two in the spring. We'll see how it works out.
It's interesting thinking about what a bee probiotic really is, *laughs* I do love the advertising, though.
Here's what we saw when I pulled the top off the boxes. There's a lot more bees than there were in December. I was pretty impressed at how many were on the patties themselves and getting chunks off of it to feed on. There's a huge chunk out of the front patty and they're both pretty nibbled.
So I figured that they were definitely using the things. The only problem was that I couldn't move the original remains, as they were too soft from the warmth of the day! So I had to cut a new patty into strips to try and fit it into the spaces between.
I am glad that they're using them, so it means that they really needed the extras. The bees do keep a little pollen in what they call beebread, and they stuff some cells with the stuff, but here there's no flowers through the winter, so pollen's hard to come by. Therefore, these patties are supplementing the food needed to raise larvae.
When I raised the lid in December none of the bees were on the lid, and nearly none of them were in the upper chamber of the two boxes. So seeing this many bees on the lid was very cool. They were active, buzzing, and two or three were coming at me to defend the hive. The rest were just busy going about their business in the box and on the lid.
There were just a few bees using the front entrance at this point. The others had already oriented, and were gone back inside. The sun had gone to the west enough to leave the hive in shadow, so it was getting gradually chillier.
I had some problems putting the new patty on until I realized that the inner lid actually had a lip of about an inch and a half, not just the width of the rim of the boxes. I had to pull the new stuff back far enough so that the lid could go back on. It was pretty clear, though, that the bees were doing well, and that their numbers have already increased.
There were about a dozen bodies out the front entrance, and one lady was dead on the front edge of the landing board. That was interesting to see, she looked as if she were about to take off, but was so utterly still.
Here's a clearer look of the two eaten away patties. There's holes in the one to the left and the one on the right is carved away quite neatly. There's poke marks everywhere, so they're definitely taking away from them both. The new patty that I put half of on here was all shiny and smooth.
The girls were all pretty active, so I have good hopes for the coming year. It's definitely not looking like they're going to die out this winter, even if it gets cold again. After they survived two cold spells, they're now increasing their numbers, so it's looking good. The more of them there are, the more area they'll be able to incubate, and the more they'll increase. I just hope that I manage to figure out if I should split the hive in March before they decide to swarm.
After the other article about the fact that the bees are still rearing young in the winter, it wasn't as unexpected as it would have been before. But I was still pleasantly surprised to see the cloud of bees hovering in front of the hive. It made me put on my suit and veil and have John light up my smoker, because I was going to approach a living, active hive instead of the one that was very quiet and didn't have that many bees in December.
So it'll probably go into the freezer at that point, and there's plenty for at least another year, even if I split the hive into two hives and have two in the spring. We'll see how it works out.
It's interesting thinking about what a bee probiotic really is, *laughs* I do love the advertising, though.
So I figured that they were definitely using the things. The only problem was that I couldn't move the original remains, as they were too soft from the warmth of the day! So I had to cut a new patty into strips to try and fit it into the spaces between.
I am glad that they're using them, so it means that they really needed the extras. The bees do keep a little pollen in what they call beebread, and they stuff some cells with the stuff, but here there's no flowers through the winter, so pollen's hard to come by. Therefore, these patties are supplementing the food needed to raise larvae.
There were just a few bees using the front entrance at this point. The others had already oriented, and were gone back inside. The sun had gone to the west enough to leave the hive in shadow, so it was getting gradually chillier.
I had some problems putting the new patty on until I realized that the inner lid actually had a lip of about an inch and a half, not just the width of the rim of the boxes. I had to pull the new stuff back far enough so that the lid could go back on. It was pretty clear, though, that the bees were doing well, and that their numbers have already increased.
There were about a dozen bodies out the front entrance, and one lady was dead on the front edge of the landing board. That was interesting to see, she looked as if she were about to take off, but was so utterly still.
The girls were all pretty active, so I have good hopes for the coming year. It's definitely not looking like they're going to die out this winter, even if it gets cold again. After they survived two cold spells, they're now increasing their numbers, so it's looking good. The more of them there are, the more area they'll be able to incubate, and the more they'll increase. I just hope that I manage to figure out if I should split the hive in March before they decide to swarm.
Tuesday, January 14, 2014
What I Didn't Know About Winter Bees
Donald Studinski is one of the more outspoken beekeepers in the Colorado beekeeping associations. He's knowledgable, experienced, and very very opinionated about how he sees the world of beekeeping. I often enjoy his missives, and recently he came up with a really nice article about what really happens with bees during the winter: Deep Freeze, Honeybees, and You. The title is kind of funny, but it has some really intriguing details about what bees really do all winter and how they actually are raising young through the cold months.
We had a good eight inches of snow during the cold blast that froze most of the rest of the country, and in the following days it started to all melt and slide off the roof.
When I had the beehive on the window-wells of the basement, it was out of the arc of the fall of snow from the 2nd story roof on that side of the house (also the solar panels are up there, which is another story all together); but now that I moved it off the window wells, the hive is right in the path of the falling snow. So I had John put the cover up. It's just a huge sheet of particle board that's screwed to a couple of supporting posts.
The problem was that the bottom edge of the particle board, once the board was covered in snow, was right where the run off from the warping board fell onto the entrance of the hive!! Half a dozen of the girls drowned trying to get out of the hive while the melt was happening. Agh. When I discovered this, John and I went out, pulled the hive back the few inches it needed to keep the entrance out from under that edge, and I propped the back of the hive up a couple of inches (the width of a 2x4). Water ran out the front. Gah.
But it all dried within six hours of that, and the next day I saw dozens of the girls flying again. They'd dragged the bodies out of the hive. I saw one of the girls bodily picking up a carcass and flying away with it. About half a dozen are dumped just below the entrance, but most have been tidily cleaned up and taken away. So they're doing quite well, it seems, and I am supposed to have a 60 degree day in the next few days. I should be able to go in and see if they're eating the patties and using the proteins for their winter brood. I'll definitely take pictures then.
We had a good eight inches of snow during the cold blast that froze most of the rest of the country, and in the following days it started to all melt and slide off the roof.
When I had the beehive on the window-wells of the basement, it was out of the arc of the fall of snow from the 2nd story roof on that side of the house (also the solar panels are up there, which is another story all together); but now that I moved it off the window wells, the hive is right in the path of the falling snow. So I had John put the cover up. It's just a huge sheet of particle board that's screwed to a couple of supporting posts.
The problem was that the bottom edge of the particle board, once the board was covered in snow, was right where the run off from the warping board fell onto the entrance of the hive!! Half a dozen of the girls drowned trying to get out of the hive while the melt was happening. Agh. When I discovered this, John and I went out, pulled the hive back the few inches it needed to keep the entrance out from under that edge, and I propped the back of the hive up a couple of inches (the width of a 2x4). Water ran out the front. Gah.
But it all dried within six hours of that, and the next day I saw dozens of the girls flying again. They'd dragged the bodies out of the hive. I saw one of the girls bodily picking up a carcass and flying away with it. About half a dozen are dumped just below the entrance, but most have been tidily cleaned up and taken away. So they're doing quite well, it seems, and I am supposed to have a 60 degree day in the next few days. I should be able to go in and see if they're eating the patties and using the proteins for their winter brood. I'll definitely take pictures then.
Subscribe to:
Posts (Atom)